How Do Excavation Companies Go About Backfilling a Septic System?

 

excavation companies Loveland

Septic tank installation consists of more than just selecting the tank of the right size, then getting it transported to your side and connecting the plumbing pipes to integrate the tank into the system – your septic system also needs to be backfilled. Here are some things to know about how your excavation company will help you do that.

How It All Starts

The first process that needs to be completed even before your septic tank arrives is to excavate a suitable hole to accommodate the tank and to make it possible for the plumbing pipes to run into the container. The process involves the creation of a large hole for the tank and probably of multiple thinner trenches to accommodate the pipes that connect your home and the tank.

Leading excavation companies Loveland area specialists say the methods used by excavation companies to create the required holes can vary from manual digging to using excavators of varying sizes and types one of the most modern and most efficient techniques used today is hydro excavation – the process of breaking down the soil with pulverized water and extracting the wet soil with the help of vacuum. The process is popular for many reasons, the most important benefits being the safe digging process even in areas that might have buried utilities underground and extraordinary efficiency.

Ideally, all the holes and trenches need to be completely level and lined with material that ensures the proper insulation of the holes and trenches to prevent the run-off of contaminated water if the tank or any of the pipes cracks or sustains any other form of damage.

Backfilling After the Tank Is Placed

After the sewage tank is placed into the hole specially excavated for it and after all the pipes are connected, the excavation company will move on to the next phase, which is the backfilling. The process consists of adding suitable filling material to make it possible for the company to create a level surface. To achieve best results, the excavation company will first of all ensure that the material used for the backfilling is suitable, consisting of rocks of the same size, such as uniform gravel and that is also free from large stones. The backfilling material is then added into the holes and trenches, one layer at a time, until the desired surface is created. In some cases, a variety of backfilling materials are used to create various layers. Achieving a certain level of compaction might also be necessary with each layer, the excavation specialists knowing exactly how to create soil layers of the right consistency.

The Time Frame

The process of backfilling takes maximum a couple of days, the only possible hindrance being bad weather. The excavation process usually adds only very little time to the overall duration of the septic tank installation procedure, especially if the selected method is hydro excavation.

When the excavation, installation and backfilling process is complete, it is usually recommended to wait for a little longer before any vegetation can be installed where the sewage tank and the pipes were installed.

Methods to Mitigate Wildfires from Reaching Your Home

traditional log home fire mitigation mountain property services

The gravest effects of global warming are increasing temperatures and dryness in summer, effects that also increase the number of severe wildfires all over the world, even in areas that were previously safe from the devastating fires starting in shrubby or wooded areas and spreading uncontrollably. Wherever your home is located, even if it is an area with moderate climate that gets the right amount of precipitation even in summer, it is very important to implement measures to prevent wildfires from reaching your home – here are some things that you can do.

Maintain Your Building and Your Landscape

Whether you have shrubs and flower beds in your yard or you also have large, old trees, regularly inspecting and maintaining your landscape and your building to make sure that there are no dead, dry plants around that can catch fire is very important. Here is how to do it right:

  • Inspect your vegetation every couple of months and cut off any dead branches and leaves. Whenever you perform any pruning, include the removal of the pruned twigs, branches, stems and leaves from the property;
  • Remove diseased trees – even your large old tree has been providing you shade and comfort for years, if it is now weak and ill, it needs to be removed. To make sure that the removal is performed safely, hire a tree trimming company to handle the task for you;
  • Regularly clean the roofs and the gutters to remove any flammable debris as well as debris that can clog the pipes or that rest for too long on your roof surface.

If you live in a fire-prone area, you might want to consider using Class-A fire resistant materials on your building, such as metal roofing and siding panels and hire fire mitigation services as a precautionary step.

Create Defensible Space Zones

The process involves the configuration of your landscape based on considerations of fire prevention, creating a strategically designed landscape. Here is how to define the zones:

  • Zone 0 – this area is at a distance of 0-5 feet from your building and it is the area in which even small flames can be a huge risk. Make sure that you keep no combustible materials in the area, such as garbage bins, flammable door mats and lumber. Remove any tree limbs that overhang the area and regularly remove any fallen leaves, twigs and pine needs that could catch fire;
  • Zone 1 – located at 5-30 feet from the building, this area is usually the space where trees and other vegetation start. Keep the area clean by regularly pruning the vegetation there and also make sure that you do not store any wood or other flammables in the zone. To make this zone as resistant to fires as possible, choose plant varieties that are resistant to your climate conditions because that is the best way to make sure that your plants stay green and healthy;
  • Zone 2 – this stripe is located at 30-100 feet from your building. Maintenance of the area is essentially the same as in the other zones.